#Icc report hilti anchors code#

Anchor specifications are summarized in Table 1 of this report. The HUS-H is available in nominal diameters of 3 / 8, 1 / 2 and 5 / 8 inch (9.5, 12.7 and 15.9 mm). The anchor is manufactured from heat-treated carbon steel and has a non-electronically applied zinc flake coating. 3.0 DESCRIPTION: MATERIALS 3.1 HUS-H Masonry Screw Anchors: The HUS-H Masonry Screw Anchor has a hex head, an integral washer, double lead threads, and a chamfered tip (see Figures 2 and 3).

The screw anchors may also be used where an engineered design is submitted in accordance Section R of the IRC. The screw anchors are alternatives to the cast-in-place anchors described in Section 2107 of the IBC.

#Icc report hilti anchors code#

(800) (562) A Subsidiary of the International Code Council DIVISION: 04 MASONRY Section: Masonry Anchorage REPORT HOLDER: HILTI, INC SOUTH 122 ND EAST AVENUE TULSA, OKLAHOMA (800) EVALUATION SUBJECT: HUS-H CONCRETE MASONRY SCREW ANCHORS 1.0 EVALUATION SCOPE Compliance the following codes: 2009 International Building Code (2009 IBC) 2009 International Residential Code (2009 IRC) 2006 International Building Code (2006 IBC) 2006 International Residential Code (2006 IRC) Property evaluated: Structural 2.0 USES The Hilti HUS-H Concrete Masonry Screw Anchor is installed in uncracked, fully grouted concrete masonry unit (CMU) construction as shown in Figure 1 of this report. 1 ICC-ES Evaluation Report ESR-2369 Reissued This report is subject to re-examination in one year.